PC Racing PC155 Flo Stainless Steel Reusable Oil Filter

Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200 percent more filter area in many cases. Our stainless filter catches items down to 35 microns, which is about 3 times better than most good paper or brass filters. Unlike glued paper filters, the Flo oil filter pleat seam is welded and able to withstand up to 600 degrees. This filter maintains consistent flow under all conditions including extreme heat, the presence of water, and cold start ups where paper filters can flow so poorly that they often cause the bypass valve to open and allow unfiltered oil to enter your engine. This high tech filter technology is widely used in all types of auto racing including NASCAR, Indy type cars, Formula 1 and in the aerospace industry where filtration is of the utmost importance. In addition to all the other benefits, our filter helps keep the land fills free of old used filters. Cleaning instructions: Note - the original filter position to ensure correct installation. Clean filter at each oil change with solvent, contact cleaner, kerosene, or any other degreasing agent, even common dish soap. Blow air through the filter from the inside out to remove any small particles or cleaning agent from the screen. Lube rubber parts with clean oil before installation. Fits: KTM front tall filter, 400-525 EXC-F/XC-F 00-07, 400-525 SX-F 00-06, 540-690/LC4 92-08, 450/525 XC ATV 08-09, 250 SX-F 05-13 250 XC-F/ XCF-W 07-13, 450/500 EXC/ XC-W 12-13, 450 SX-F F.E. 12, 450 SX-F 13; Polaris Outlaw 450/525 07-13 and more.

Fits: KTM front tall filter, 400-525 EXC-F/XC-F 00-07, 400-525 SX-F 00-06, 540-690/LC4 92-08, 450/525 XC ATV 08-09, 250 SX-F 05-13 250 XC-F/ XCF-W 07-13, 450/500 EXC/ XC-W 12-13, 450 SX-F F.E. 12, 450 SX-F 13; Polaris Outlaw 450/525 07-13 and more

Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200 percent more filter area in many cases

The Flo stainless filter catches items down to 35 microns, which is about 3 times better than most good paper or brass filters

Unlike glued paper filters, the Flo oil filter pleat seam is welded and able to withstand up to 600 degrees

This filter maintains consistent flow under all conditions including extreme heat, the presence of water, and cold start ups where paper filters can flow so poorly that they often cause the bypass valve to open and allow unfiltered oil to enter your engine